Da' Rail is an add-on forearm that converts your current stock / chassis to the new style PRS chassis with the longer and wider fore arms. Da' Rail include that ARCA rail on the bottom side. Da' Rail allows better balance on your support bag and also gives you a wider balance area with room to place your hand/ thumb to help steady the rifle like the wing / rails that are out there. Da' Rail increases your useable forearm to over 17 inches, plenty of room for Bipods, bags and accessaries.

The Da' Rail does all this at the fraction of the price it would cost to upgrade your chassis.

Dimensions 2 -3/4" x 17 -5/8"

Steel 4 lbs 12 oz.  (76 oz)    $249.95

Aluminum 1 lbs 10 oz  (25.7oz) $229.95

Brass over 5 lbs $299.95

Rail has M-loc spacing screw Holes.

Rail has TWO slotted sections to allow for most existing chassis/ stock holes.

(does NOT fit Manners CZ457 existing holes)

Rail had tapped 10-32 holes for mounting to MPA BA Comp

Rail has drilled and tapped holes to allow for a barricade stop.

Hardware is available by selecting the options below.

I would recommend using Loc-tite and torque screws to 30 in/lbs if in metal.

If you have questions regarding mounting please TEXT 507-269-2995

I have 14.25" - 59 oz and 13" - 54oz available by special request. WARNING, this defeats the purpose of having the benefit of extra-leverage from the long rail.

NRL 22 2025 Base Class Rules (allowed)

B. Divisions

NRL22 monthly matches have seven divisions - Open, Base, Young Guns, Ladies, Air Rifle, Old Guns, and

Adaptive. NRL22 is intended to be a friendly environment for beginners to learn the sport of precision rifle so

coaching is encouraged for new competitors of all divisions. “New competitors” is a term that is not strictly

defined; however, it is generally recommended to be competitors who are shooting their first or second NRL22

match or are classified as a Novice.

1. Competitors must pick one division to shoot at the beginning of a local monthly shoot or the National

Championship. The competitor is only eligible for placement in the division in which they signed up. For

example, if a female competitor with a base rifle signs up for Ladies division and wins the entire shoot,

she will only be recognized for the placement in the division in which she signed up for. In this example,

that would be the Ladies division.

2. Open is for any competitor that does not meet the criteria of Base, Young Guns, Ladies, Old Guns, Air

Rifle, or Adaptive division.

3. Base division is intended to be budget oriented and friendly to new competitors. Any rifle system that

comes in at or under a combined MSRP of $1500 USD, as listed on the manufacturer’s website, shall

be eligible to compete in Base division. This $1500 USD combined MSRP price is the limit for the sum

of the rifle's MSRP and the scope's MSRP.

a. The following are considered accessories to the rifle and are allowed in Base division:

Interchangeable/removable grips utilizing factory attachment points, bottom metal/trigger

guard/magwell, scope rings, scope bases, bipods, suppressors, data card holders, magazines,

spare magazine holders, auto bolt releases, extended magazine releases, bubble levels, digital

levels, bolt knobs, and rail attached weights or weights utilizing factory attachment points.

b. Factory barrels must remain in their original factory specifications. Threading of the barrel is

allowed.

2025 NRL22 RULES | VALID 5/1/2024 THRU 4/30/2025

2025 NRL22 Rules 16 6/12/2024

c. Barrel tuners, or items attached to the barrel that act as a tuner are not allowed in Base division.

Thread protectors and suppressors are allowed in Base division.

d. Safe adjustments to the factory trigger are allowed but aftermarket triggers are prohibited.

e. The addition of internal weights is not allowed.

f. Modifications to the stock including drilling holes are not allowed unless being done with one of

the following exceptions listed below:

i. Bedding of the action

ii. Mounting a flat rail (e.g. arca or picatinny) to the bottom of the forend.

iii. Adding a cheek riser

iv. Adding a sling stud.

g. Base rifles must remain in their factory configured stock/chassis. Applying paint and/or cerakote

to the original factory stock/chassis is allowed, but if a barreled action is removed from the

factory stock/chassis and placed in an aftermarket stock not available by the manufacturer and

not available as an option to purchase as a complete rifle, then that rifle will be an Open division

rifle.

h. The production status and MSRP on the first day of the season will be considered valid for the

entire season. Left-handed models identical in configuration to right-handed models but with a

higher MSRP will be recognized at the MSRP of the right-handed version. Base division

competitors should be mindful that manufacturers may change the MSRP of their products from

time to time. Rifles and scopes that are out of production on the first day of the season are

eligible if the last production year MSRP of the rifle and optic adjusted for inflation using the

following link https://www.bls.gov/data/inflation_calculator.htm fall within the MSRP limits and

the rifle meets all other criteria for Base division. NRL22 will not maintain a list of authorized

rifles or scopes due to the dynamics of the ever-changing cycle of revised models, new

products, and upgrades being released by manufacturers.

i. At sign in, the Match Director should inspect the rifle and ensure that the rifle meets the

aforementioned criteria. If the MSRP goes over or unauthorized modifications have been made,

the competitor shall compete in the Open division or another division so long as he/she meets

the criteria of that division. It is difficult for local Match Directors to keep up with every detail.

Base division competitors are encouraged to assist local Match Directors with ensuring Base

division rifles appropriately fall into Base division. Match Directors are responsible for enforcing

the Base division regulation matters when they arise on a case-by-case basis. For the National

Championship, these rules will be followed to the letter. There will be a gunsmith or a

representative from NRL22 present at the NRL22 Championship for Base division rifle

inspections.

PRS 22 2024 Rules (allowed)

2.2.5 Accessories: For the purpose of the Production Division, the following items are

considered accessories and will not be regulated or prohibited from being used on or in

conjunction with your production rifle: muzzle brakes, suppressors, barricade

stops/blocks, custom paint, rings, red dot sights, bags, pads, bipods, rails, zoom levers,

data card holders, bolt knobs, bubble level, grips, handguards, external weights, tuners

etc.

Counter sink bit information:

If you have a hand drill and a steady hand you can use the counter sink drill bit that makes the install easier.

Remove barreled action. Drill the small holes through from Da’Rail side. I would recommend doing one hole at a time and placing the screw in just to hold the alignment. Using the swivel stud location and the old swivel stud screw works very good. When drilling ensuring you are perpendicular to the stock/ rail. To drill the counter sunk holes for the T-nuts. Drill from the top side down using the small hole already there from the other side. Remember high bit speed & very slow pressure into the wood. The screws shipped with the kit are the correct length for the CZ MTR, you can trim to length for other stocks or request shorter ones.